Hp laserJet Pro M402, M403 User Guide enww

3
A4 / A5
B5
8.5
ENWW
Load Tray 3
21

---

3.
Adjust the paper-length guide by squeezing the 
adjustment latch and sliding the guides to the 
size of the paper being used.
11
B5
A4
3
4.
Load paper into the tray. For information about 
how to orient the paper, see 
Tray 3 paper 
orientation on page 23
NOTE:
Do not adjust the paper guides tightly 
against the paper stack. Adjust them to the 
indentations or markings in the tray.
NOTE:
To prevent jams, adjust the paper guides 
to the correct size and do not overfill the tray. Be 
sure that the top of the stack is below the tray 
full indicators, as shown in the enlargement in 
the illustration.
NOTE:
If the tray is not adjusted correctly, an 
error message might display during printing or 
the paper might jam.
3
5.
Slide the tray completely into the printer.
RD
2
1
3
6.
At the computer, begin the printing process from 
the software application. Make sure that the 
driver is set to the correct paper type and size for 
the paper being printed from the tray.
22
Chapter 2 Paper trays
ENWW

---

Tray 3 paper orientation
When using paper that requires a specific orientation, load it according to the information in the following 
table.
Paper type
Output
How to load paper
Letterhead or preprinted
1-sided printing
Face-up
Top edge at the front of the tray
2
1