The process diagram illustrates the way in which a tyre is changed

The process diagram illustrates the way in which a tyre is changed.

Overall, it is clearly seen that the process of changing a tyre involves 13 steps and is devided into 2 main stages: removing the old tyre; install new one.
The first step in the process of changing a tyre is to find a safe place to pull over and turn on hazard lights. After this, stop the car at the safe place and take a spare tyre, jack and wrench from the car. Then the hub cap is released from the old tyre and don’t remove the wheel nuts at this time; just loosen them and put the car up about 16 sm through jack. The wheel nuts are removed from wheel and the old tyre is taken from the car.
In the following stage, the spare tyre is placed to the car and the wheel nuts are not tightened all the way. Next, the jack is removed from the car and the wheel nuts are tightened each one halfway, then continue until all are tight. Finally, check your equipments and don’t leave anything on the side of the road.

(192 words, maybe band 7 )