Qurbonov Ahmadjon 5-laboratoriya ishi

Код
Комментарии к коду
Router> en
Router# enable
Router# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# interface gigabitethernet 0/0	FastEthernet 0/0 interfeys konfiguratsiya rejimiga kirish uchun buyruq
Router(config-if)# ip address 192.168.0.1 255.255.255.0	IP manzilini sozlash
Router(config-if)# no shutdown	Barcha interfeyslar sukut bo'yicha o'chirilgan. Interfeysni yoqing
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Router(config-if)# exit
	Telnet yoki ssh ulanishi virtual terminal (vt) deb nomlanadi va

	quyidagicha sozlanadi
Router(config)# line vty 0 4	0 4 - bu 5 foydalanuvchi virtual terminallari = telnet seanslari
Router(config-line)# login local
Router(config-line)# password telnet123
Router(config-line)# privilege level 15	bu foydalanuvchi huquqlari darajasi. Hammasi bo'lib 16 daraja mavjud: 0- 15. imtiyoz darajasi 0 - bu barcha rejimlarda ishlaydigan o'chirish, yoqish, chiqish, yordam va chiqish buyruqlari 1-imtiyoz darajasi - Bular foydalanuvchi rejimi buyruqlari, ya'ni cis-ga etib borganingizdan va Router> buyruqni ko'rishingiz bilan siz 1- darajali imtiyoz darajasi 15 - bu imtiyozli rejim buyruqlari, Unix-dagi kabi
Router(config-line)# exit
Router(config)# username cisco privilege 15 password cisco123	foydalanuvchiga huquqlar darajasini tayinlang, foydalanuvchi yaratiladi
Router(config)# end
Router#
Router# wr
Building configuration...
[OK]
Router#

4. 
   После настройки маршрутизатора Cisco создали имя пользователя и пароль для Telnet-соединения. Перед подключение к Роутер настроим конфигурацию в ПК в рабочей области следующим образом:
   

4. 
   IP sozlamasini yoping va CMD buyruq satriga o'ting ( Command promt).
   

Buyruq satrida telnet 192.168.0.1 kiriting va Enter bosing. Keyin foydalanuvchi nomi va parol kiritiladi. Bunday holda, ism: cisco , parol: cisco123 ( parolni kiritish ko'rinmas ).



Cisco routeriga ulanganingizdan so'ng, siz LAN va WAN orqali qurilmangizni boshqarishingiz mumkin . Qurilmaga ulanishlarni ko'rish uchun show line. buyrug'ini bajaring .
Endi SSH-ni kommutatorda sozlaylik - buning uchun siz hostname, domen nomini ko'rsatishingiz va shifrlash kalitini yaratishingiz kerak.

Router-ni ikki marta bosing va buyruq satriga o'ting. Dastlabki sozlamalarni o'tkazib yuborish uchun Enter tugmasini bosing .

Чтобы подключить SSH на маршрутизатор, выполните следующие команды по порядку.

Router> enable
Router# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# hostname ADMIN	Hostname belgilash
ADMIN(config)# interface gigabitethernet 0/0
ADMIN(config-if)# ip address 192.168.1.1 255.255.255.0
ADMIN(config-if)# no shutdown
ADMIN(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up exit
ADMIN(config)# ip domain name ciscoadmin	Biz domen nomini ko'rsatamiz
ADMIN(config)# crypto key generate rsa	Shifrlash kaliti yaratilmoqda
The name for the keys will be: ADMIN.ciscoadmin General Purpose Keys. Choosing a key modulus greater than 512 may take a few minutes.
How many bits in the modulus [512]: 1024	Kalit uzunligini tanlang - 1024
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
ADMIN(config)#ip ssh version 2	SSH versiyasini belgilaydi
*мар 1 0:6:0.73: %SSH-5-ENABLED: SSH 1.99 has been enabled
ADMIN(config)#ip ssh time-out 10	Kutish vaqti
ADMIN(config)#ip ssh authentication-retries 3	Avtorizatsiya urinishlari soni

ADMIN(config)#line vty 0 4
ADMIN(config-line)#login local
ADMIN(config-line)#privilege level 15
ADMIN(config-line)#transport input ssh
ADMIN(config-line)#exit
ADMIN(config)#username cisco privilege 15 password cisco123
ADMIN(config)#end
ADMIN#
%SYS-5-CONFIG_I: Configured from console by console
ADMIN#wr
Building configuration...
[OK]
ADMIN#

Endi IP-configuration bo'limida shaxsiy kompyuter parametrlarini sozlaylik :

:

Ulanish uchun, kompyuterga buyruq satriga o`tib, quyidagilarni kiriting va Enter tugmasini bosing :

ssh - l cisco 192.168.1.1
- l – kirish (login) qiymati
сisco – marshrutizatorga ulangan foydalanuvchi nomi . 192.168.1.1 - marshrutizatorning ip manzili.
Yaratilgan parolni kiriting va ulanish o'rnatiladi. Show ssh buyrug`i bajarilgandan so'ng , buyruq satrida SSH protokoli versiyasini tekshirish mumkin.

Vazifa. TelNet va SSH protokollarini sozlang. O`zingizning IP - manzilingizni ko'rsating va foydalanuvchini o`zining nomi bilan ulang (username: ismingiz, password: ismi va guruh raqami).

Nazorat savollari:

1. 
   TelNet protokoli tavsifini bering .
   
2. 
   SSH protokolini tavsiflab bering .
   
3. 
   TelNet va SSH protokollari o'rtasidagi farqlarni aytib bering .
   
4. 
   Telnet va SSH protokollarining asosiy vazifalari.
   
5. 
   SSH protokolining nechta versiyasi mavjud?