Hp laserJet Pro M402, M403 User Guide enww

Print with EconoMode
This printer has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner. 
However, using EconoMode can also reduce print quality.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply 
might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer 
acceptable, consider replacing the toner cartridge.
NOTE:
If this option is not available in your print driver, you can set it using the HP Embedded Web Server.
1.
From the software program, select the Print option.
2.
Select the printer, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab.
4.
Click the EconoMode check box.
Set the Sleep/Auto Off After setting
Use the control panel menus to set the amount of idle time before the printer enters sleep mode.
Complete the following procedure to change the Sleep/Auto Off After setting:
1.
On the printer control panel, press the 
OK
button.
2.
Open the following menus:
●
System Setup
●
Energy Settings
●
Sleep/Auto Off After
3.
Use the arrow keys to select the time for the Sleep/Auto Off delay, and then press the 
OK
button.
Set the Shut Down After delay and configure the printer to use 1 watt or less of 
power
Use the control panel menus to set the amount of time before the printer shuts down.
ENWW
Energy-conservation settings
63

---

NOTE:
After the printer shuts down, the power consumption is 1 watt or less.
Complete the following procedure to change the Shut Down After Delay setting: