Basic Configuration Commands Table of Contents

Note:
The where command is different from the show telnet command. The former is used at the client side and the displayed information is the outward telnet connection. The latter is used at the server and the displayed information is the inward telnet connection.

Example

switchA>telnet 192.168.20.1
Welcome to Multi-Protocol 2000 Series switch
switchB>ena
switchB#(Press ctrl-shift-6+x)
switchA> telnet 192.168.20.2
Welcome to Multi-Protocol 2000 Series switch
switchC>ena
switchC#(Press ctrl-shift-6+x)
switchA>where
NO. Remote Addr Remote Port Local Addr Local Port
1 192.168.20.1 23 192.168.20.180 20034
2 192.168.20.2 23 192.168.20.180 20035
Enter where at switch A. The mounted outward connection is displayed.

2.1.5 resume

It is used to resume the currently mounted outward telnet connection:
resume no

Parameter

Parameter	Description
no	Number of the currently mounted telnet session that is checked through the where command

Default

None

Command mode

Global configuration

Instruction

The command can be used to resume the currently mounted outward telnet connection at the client side.

Example

switchA>telnet 192.168.20.1
Welcome to Multi-Protocol 2000 Series switch
switchB>ena
switchB#( press ctrl-shift-6+x)
switchA> telnet 192.168.20.2
Welcome to Multi-Protocol 2000 Series switch
switchC>ena
switchC#( press ctrl-shift-6+x)
switchA>where
NO. Remote Addr Remote Port Local Addr Local Port
1 192.168.20.1 23 192.168.20.180 20034
2 192.168.20.2 23 192.168.20.180 20035
switchA>Resume 1
[Resuming connection 1 to 192.168.20.73 . . . ]
(enter)
switchB#
After you enter where at switch A and the mounted outward connection of switch A is displayed, enter Resume1. You will be prompted that connection 1 is resumed. The command prompts of switch B are displayed after the Enter key is pressed.