The User Manual of 580 Series General Frequency Converter

4.7.5 Jog operation

In many applications, the frequency converter needs to be operated in low speed for a short time to test the equipment state or conduct debugging. The jog is quite appropriate in this case.

Fig. 4-13 Jog mode

4.7.5.1 Parameter setting and operation through the jog of operation panel

Fig. 4-14 Jog of operation panel

After the relevant function code is set as the figure above, press MF.K key when the frequency converter is stopped. The frequency converter will start forward running in low speed. If MF.K key is released, the frequency converter will be slowed down and stopped.

If the reverse jog is needed, it is required to set F7-01 ＝4 and F8-13=0, that is to say, the reverse jog is allowed. Then press MF.K key.