The User Manual of 580 Series General Frequency Converter

3.1.1 Installation conditions

1) Ambient temperature: The surrounding ambient temperature has a high influence on the service life of frequency converter so that the working temperature of frequency converter shall not exceed the allowable temperature range (-10 ℃～50℃).

2) Mount the frequency converter on the surface of flame retardant and keep enough space around for heat dissipation. The work of frequency converter may bring lots of heat. Then use the screw to mount the frequency converter vertically on the erection support.

3) Please install the frequency converter in the place almost free from vibration. The vibration shall not be more than 0.6G. Particularly keep the frequency converter away from the punch and other equipments.

4) Keep away from the place with direct sunshine, moisture and water drips.

5) Keep away from the site with corrective, combustible and explosive gas in the air.

6) Keep away from the site with oil dirt, much dust and much metal dust.

7) 580 series plastic-shell product is a built-in product which must be installed in the final system. The final system shall be set with fireproof shell, electrical protective enclosure and mechanical protective enclosure according to local law and regulations as well as IEC standard requirements.