Study of Cables in the Distribution System: Parameters Calculation, Fault Analysis, and Configuration Optimization

Table 5.
Data of first type cable [23]. 
Parameters 
Value 
Parameters 
Value 
N
3
1 
R
0.079e-3
0 
0
0.341 
0
0 
20
0.095 
90
0.637 
1
72.9 
Table 6.
Data of second type cable [23]. 
Parameters 
Value 
Parameters 
Value 
N
1
1 
R
0.0763e-3
0 
0
0.341 
0
0 
20
0.095 
90
0.751 
1
35.8 

---

137 
References 
[1] 
J. M. Akihiro Ametani and Isabel Lafaia, “Review of Underground Cable 
Impedance and Admittance,” 
9th Int. Conf. Insul. Power Cables
, no. 4, pp. 4–9, 
2015. 
[2] 
K. O. Abledu, “Impedance Calculation of Cables using Subdivisions of the Cable 
Conductors,” M.S. Thesis, University of Science and Technology, Kumasi, 1976.
[3] 
U. R. Patel, B. Gustavsen, and P. Triverio, “An equivalent surface current 
approach for the computation of the series impedance of power cables with 
inclusion of skin and proximity effects,” 
IEEE Trans. Power Deliv.
, vol. 28, no. 4, 
pp. 2474–2482, 2014. 
[4] 
J. Knockaert, J. Peuteman, J. Catrysse, and R. Belmans, “Measuring Line 
Parameters of Multiconductor Cables using a Vector Impedance Meter,” 
Electr. 
Eng.
, no. 2, pp. 109–112, 2010. 
[5] 
A. A. Hafner, M. V. Ferreira da Luz, and W. P. Carpes Jr., “Impedance and 
Admittance Calculations of a ThreeCore Power Cable by the Finite Element 
Method,” 
International Conference on Power Systems, 
p. 8, 2015. 
[6] 
Y. Yin and H. W. Dommel, “Calculation of frequency-dependent impedances of 
underground power cables with finite element method,” 
IEEE Trans. Magn.
, vol. 
25, no. 4, pp. 3025–3027, 1989. 
[7] 
H. H. EI-Tamaly and H. A. Ziedan, “Sequence Impedances of Overhead 
Transmission Lines Carson's Method Versus Rudenberg's Method”, Proceedins of 
the 41
st
International Universities Power Engineering Conference
,
no. 6, pp. 298–

---

138 
302, 2006. 
[8] 
H. Keshtkar, S. Khushalani Solanki, and J. M. Solanki, “Improving the accuracy of 
impedance calculation for distribution power system,” 
IEEE Trans. Power Deliv.
, 
vol. 29, no. 2, pp. 570–579, 2014. 
[9] 
O. Ramos-lea, J. L. Naredo, S. Member, F. A. Uribe, S. Member, J. L. Guardado, 
and S. Member, “Accurate and Approximate Evaluation of Power-Line Earth 
Impedances Through the Carson Integral,” 
IEEE Transactions on Electromagnetic 
Compatibility, 
vol. 59, no. 5, pp. 1465–1473, 2017. 
[10] Mip-PSCT, “Line and Cable Parameter Calculation,” 
Power Res. Dev. Consultants 
Pvt. Ltd
.
[11] Turan Gonen, 
Electric Power Distribution Engineering
, Third Edition, CRC Press, 
2013. 
[12] D. A. Tziouvaras, H. J. Altuve, and F. Calero, “Protecting mutually coupled 
transmission lines: Challenges and solutions,” 
2014 67th Annu. Conf. Prot. Relay 
Eng. CPRE 2014
, pp. 30–49, 2014. 
[13] CYME International- CYMCAP, “http://www.cyme.com/software/cymcap/.” . 
[14] PowerWorld Corporation, “Simulator User ’ s Guide,” 
Simulator User ’ s Guide
, 
vol. 1, no. 217, pp. 64–66, 2011. 
[15] G.J. Anders, “Rating of electric power cables: ampacity computations for 
transmission, distribution, and industrial applications.pdf.” The Institute of 
Electrical and Electronics Engineers Press/McGraw-Hill, New York, 1997. 
[16] C. Garrido, A. F. Otero, and J. Cidrás, “Theoretical model to calculate steady-state 

---

139 
and transient ampacity and temperature in buried cables,”