Страница 1 мировой engineering стандарты общая спецификация

Table C15: Definition of Manufacturing Data dataIdentifier
DID Description
R/W
Data Type
Len
$B2 
GM ManufacturingData (GMMD)
R/W
USN
5
This DID contains five bytes of ManufacturingData which is both written and read by tooling in the
vehicle assembly plant during the production process. This area in product memory is used as a scratch
pad for assembly tooling to pass test results back and forth from the various testers used in the vehicle
assembly process. The ECU memory used for this DID shall be permanent memory (e.g., flash or
EEPROM).
Position
1
2
3
4
5 …
…
…
--``,,``````,``,,``,,,`,`,`,,-`-`,,`,,`,`,,`---
Page 302
GM WORLDWIDE ENGINEERING STANDARDS
GMW3110
Table C16: Definition of Data Universal Numbering System Identification
DID
Description
R/W Data Type
Len
$B3 
Data Universal Numbering System Identification (DUNS)
R
ASCII
9
This DID contains the data necessary to meet the component traceability requirements as specified in
GMW4710 and GMW15862. This DID contains the DUNS Id assigned to the component supplier’s
manufacturing site.
Position
1
2
3
4
5 6 7 8 9
---
DUNS
1
2
3
4
5 6 7 8 9
---
Hex value
31 32 33 34 35 36 37 38 39
---

---

25.06.2020
WORLDWIDE ENGINEERING STANDARDS General Motors Local Area Network Enhanced Diagnostic Test Mode Specification
https://translate.googleusercontent.com/translate_f
268/298
© Copyright 2010 General Motors All Rights Reserved
February 2010
Page 302 of 336
--``,,``````,``,,``,,,`,`,`,,-`-`,,`,,`,`,,`---