Seagate Technology llc. All rights reserved

Figure 7
Mounting Dimensions (for 1-disk models) (alternate basedeck)
100.350+-
0.200
0.250 
69.850 ± 0.250 
2.499 ± 1.270 
7.949 ± 1.270 
(16.520) 
(22.450) 
(90.600) 
(14.000) 
2X (3.000) 
7.000 0.200 
2X M3 X 0.5-6H
MOUNTING HOLES: BOTH SIDES
4MM MIN. SCREW DEPTH FROM
M3 PADS. NO THRU.
3.5+.075-.3X90
(3.500) 
BASE
BOTH SIDES
4 X M3 X 0.5-6H 
2.5MM MIN FULL THREAD. NO THRU
3.5 +.075 -.3 X90
RECOMMENDED
TEMPERATURE
MEASUREMENT
LOCATION

---

Seagate FireCuda Product Manual, Rev. H
25
Configuring and Mounting
Figure 8
Mounting Dimensions (for 2-disk models)
100.35+-
0.20
0.25
69.850 0.250
22.450
16.520
7.949 1.270
2.499 1.270
(90.600)
(14.000)
2X (3.000) BOTH SIDES
7.000 0.200
BASE
(13.430) 
(3.500) 
2X M3 X 0.5-6H MOUNTING 
HOLES: BOTH SIDES
4MM MIN SCREW DEPTH 
FROM M3 PADS. NO THRU
3.5 +.075 -.3 X90
4 X M3 X 0.5-6H 
2.5MM MIN FULL THREAD. NO THRU
3.5 +.075 -.3 X90
RECOMMENDED
TEMPERATURE
MEASUREMENT
LOCATION

---

Seagate FireCuda Product Manual, Rev. H
26
Serial ATA (SATA) Interface 
4.0
Serial ATA (SATA) Interface
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 
0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also supports the use of the IORDY signal to provide reliable high-speed data
transfers.
For detailed information about the Serial ATA interface, refer to the 
Serial ATA: High Speed Serialized AT Attachment
specification.