Introduction to Health and Safety at Work
364
more than 12 months before the lifting equipment is
put into service
➤
if it is obtained from another undertaking, it is accom-
panied by physical evidence of an examination.
A copy of this thorough examination report shall be kept
for as long as the lifting equipment is used (or, for a lift-
ing accessory, two years after the report is made) (Regu-
lation 11).
Where safety depends on the installation conditions,
it shall be thoroughly examined:
➤
after installation and before
being put into service
➤
after assembly and before being put into service at
a new site or in new location
to ensure that it has been installed correctly and is safe
to operate.
A copy of the thorough examination report shall be
kept for as long as the lifting equipment is used at the
place it was installed or assembled (Regulation 11).
Lifting equipment, which is exposed to conditions
causing deterioration, which
may result in dangerous
situations, shall be:
➤
thoroughly examined at least every 6 months (for lift-
ing equipment for lifting persons, or a lifting acces-
sory); at least every 12 months (for other lifting
equipment); or in accordance with an examination
scheme; and each time that exceptional circum-
stances, liable to jeopardize the safety of the lifting
equipment, have occurred and a copy of the report
kept until the next report is made,
or for two years
(whichever is longer)
➤
inspected, if appropriate, by a competent person at
suitable intervals between ‘thorough examinations’
(and a copy of the record kept until the next record
is made).
All lifting equipment shall be accompanied by physical
evidence that the last ‘thorough examination’ has been
carried out before it leaves an employer’s undertaking
(or before it is used after leaving another undertaking).
The user, owner, manufacturer or some other
independent party may draw up examination schemes
provided they have the necessary competence.
Schemes
should specify the intervals at which lifting equipment
should be thoroughly examined and, where appropriate,
those parts that need to be tested. The scheme should
take account, for example, of its condition, the environ-
ment in which it is used, the number
of lifting operations
and the loads lifted.
The ‘competent person’ carrying out a thorough
examination should have appropriate practical and
theoretical knowledge and experience of the lifting
equipment to be examined to enable them to detect
defects or weaknesses and to assess their importance
in relation to the safety and continued use of the lifting
equipment. They should also determine whether a test is
necessary and the most appropriate method for carrying
it out.
Do'stlaringiz bilan baham: