Hp laserJet Pro M402, M403 User Guide enww

Configure IP network settings
●
Introduction
●
Printer sharing disclaimer
●
View or change network settings
●
Rename the printer on a network
●
Manually configure IPv4 TCP/IP parameters from the control panel
●
Link speed and duplex settings
Introduction
Use the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and 
not of the HP printer drivers. Go to Microsoft at 
www.microsoft.com
.
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
1.
Open the HP Embedded Web Server (EWS):
a.
On the printer control panel, press the 
OK
button. Open the Network Setup menu, and then select 
Show IP Address to display the IP address or host name.
b.
Open a Web browser, and in the address line, type the IP address or host name exactly as it 
displays on the printer control panel. Press the 
Enter
key on the computer keyboard. The EWS 
opens.
NOTE:
If the Web browser displays a There is a problem with this website’s security certificate
 
message when attempting to open the EWS, click Continue to this website (not recommended).
Choosing Continue to this website (not recommended) will not harm the computer while 
navigating within the EWS for the HP printer.
2.
Click the Networking tab to obtain network information. Change settings as needed.
Rename the printer on a network
To rename the printer on a network so that it can be uniquely identified, use the HP Embedded Web Server.
1.
Open the HP Embedded Web Server (EWS):