|
6.1. Works to be done and range of possible impacts
Works to be done
|
Anticipated impact
|
Construction Phase
|
Arrangement of Contractor’s camp and preparation of rehabilitation areas for works :
Arrangement of external access roads and approaches;
Arrangement of warehousing and production plant;
Preparation of social-residential facilities;
Arrangement of temporary buildings and facilities for construction needs;
Fencing of construction sites and areas (protective and warning);
Cutting of topsoil to be used for recultivation of soils and storage at special allocated places;
Drainage works (for the period of construction);
Arrangement of permanent and temporary site roads (access, haulage);
Temporary power supply;
Stop industrial areas of the objects to be rehabilitated.
|
Emissions of combustion products, dust generation;
Noise emissions, and perceptible vibrations;
Damage of local roads pavement;
Creation of solid and liquid wastes (used accumulators, tires, oils);
Risk of fuel and oil spills;
Potential risks, connected with the safety of population (e.g. traffic and pedestrian safety).
|
Construction works for the objects included into the treatment facility infrastructure:
Construction-installation works;
Fueling of means of transportation, special construction technical equipment and machinery;
Construction of temporary roads;
Operation of temporary construction base.
|
Emissions of combustion products, dust generation;
Noise emissions, and perceptible vibrations;
Risk of spills of fuel and oils;
Creation of hazardous wastes;
Damage/disturbance of the components of biodiversity.
|
Construction of sewer net to admit service sewage discharge waters to the treatment facility:
Earthworks;
Process of construction-installation works;
Working of the means of transportation, special construction technical equipment and machinery;
Construction of temporary roads;
Operation of temporary construction base (including construction technical equipment maintenance site).
|
Emissions of combustion products, dust generation;
Noise emissions, and perceptible vibrations;
Traffic disturbances, traffic and pedestrian safety;
Damage of local roads pavement;
Potential risks, connected with the safety of population:
-
Risk of spill of fuel and oils;
-
Creation of hazardous wastes;
|
Operation Phase
|
Routine maintenance of sewage systems
|
Spread of dust, products of combustion in the atmospheric air;
Spread of noise;
-
Risk of spill of fuel and oils;
-
Potential risks, connected with the safety of population.
|
Operation of sewage systems
|
-
Improvement of sanitation and ecological situation in Mtskheta and the nearby territories.
-
Risks due to emergency situations.
| 6.2 Construction Phase Impacts
6.2.1 Impacts on the Physical Environment
Emissions into the Atmospheric Air
The Project object (treatment facilities for discharge waters from Mtskhets) have no stationary sources of the atmospheric air pollution and, accordingly, on the stage of operation there will be no emission of hazardous substances.
Due to the above mentioned the objects do not need development of technical report for inventory of the atmospheric air pollution sources and emitted hazardous substances and project for maximum allowed norms of emission of hazardous substances.
The possibility of atmospheric air pollution during the construction phase works is reviewed.
From the listing of the mentioned works, the anticipated emissions into the atmospheric air from the technological processes, such as earthworks (excavation of trenches, pipe welding, pipe placement into trenches, backfill of trenches, etc.) are evaluated and calculated. Operation of number of machines and equipment and use of other needed material resources, including welding electrodes is provided for these operations.
Due to the above mentioned, the following sources of pollution are identified: excavator, bulldozer, pipe-laying crane and tractor based welding machine. Due to the works conducted on the construction site, emission of hazardous substances into the atmospheric air is expected from mobile (means of construction transportation: bulldozer, excavator, dumper) sources that cause spread of dust, carbon monoxide, nitrogen oxides, sulfur dioxide, carbon-black, hydrocarbons.
Values of maximum allowable concentrations for these hazardous substances are given in the table below.
Substance
|
Maximum permissible cocentration (MAC) mg/m3/average time
|
Azote dioxide
|
0,085/30 minutes
|
0,04/24 hours
|
Sulphur dioxide
|
0,5/ 30 minutes
|
0,05/24 hours
|
Carbon Oxide
|
5,0/30 minutes
|
3,0/24 hours
|
Inorganic dust
|
0,3
|
Qualitative norms of the atmosphere air: According to the Chapter VI, paragraph 22 of Social Health Security Rule of Georgia (27.06.2007) According to the aim of social health protection The Georgian Ministry of Health, Labor and Social Defense creates and establishes the safe environment qualitative norms for the mankind that includes the admissible concentrations and unhealthy influence norms. According to the mentioned rule, the rules of air pollution protections and the norms of unhealthy influence concentrations are given in the decree about ”Affirmation of the environment qualitative condition norms and their affirmations” issued on August 16, 2001 Decree # 297/N by the Minister of Georgian Ministry of Health, Labor and Social Protection. (Georgian Law Herald # 90 24.08.2001) with some changes and additions that have been placed in the decree of the same ministry #38/N (24.02.2003). The norms of the atmosphere pollution are given also in the decree # 89 (October 23, 2001). This is a decree about calculation of the air pollution index.
Maximum permissible cocentration of the Pollutants over the Above-Ground Layer of the Atmosphere
Noise standards: The standards about the noise are allowed according to the Decree # 297/N of Georgian Ministry of Health, Labor and Social Defense about ”affirmation the norms over the qualitative norms of the environment” issued on August 16, 2001. There are defined as the admissible norms of noise as the maximum of the admissible norms for several zones of the territories
Time
|
The average allowed size of noise (DCB)
|
The maximum allowed norms of noise (DCB)
|
7am – 11 pm
|
55
|
70
|
11pm – 7am
|
45
|
60
|
Sound maintenance of machinery shall be provided during the activities within the established period of time, in order not keep them in good working condition and emissions into the atmosphere below the established maximum allowable concentration.
Do'stlaringiz bilan baham: |
