905
Mismatched WAN Encapsulations
If you have a point-to-point link but the encapsulations aren’t the same, the link will never
come up. Figure 21.16 shows one link with PPP and one with HDLC.
f i g u r e 21.16 Mismatched WAN encapsulations
Pod1R1
Pod1R2
hostname Pod1R1
username Pod1R2 password cisco
interface serial 0
ip address 10.0.1.1 255.255.255.0
clock rate 64000
bandwidth 512
encapsulation ppp
hostname Pod1R2
username Pod1R1 password cisco
interface serial 0
ip address 10.0.1.2 255.255.255.0
bandwidth 512
encapsulation hdlc
Look at router Pod1R1 in this output:
Pod1R1#
sh int s0/0
Serial0/0 is up, line protocol is down
Hardware is PowerQUICC Serial
Internet address is 10.0.1.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 254/255, txload 1/255, rxload 1/255
Do'stlaringiz bilan baham: |