Ccna certification Practice Tests

C. 

Switch(config-if)#switchport mode access

D. 

Switch(config-if)#no spanning-tree portfast

 28.  What is the command to verify a VLAN and the port(s) it is associated with?

A. 

Switch#show vlans

B. 

Switch#show vlan

C. 

Switch#show access vlan

D. 

Switch#show vlan database

 29.  You are configuring a Catalyst 9200 switch, a VLAN is not configured yet, and you 

mistakenly configure it on an interface with the command 

switch access vlan 12. 

What will happen?

A.  The command will error.

B.  The command will complete and update the VLAN database.

C.  The command will complete, but before forwarding can happen, the VLAN must be 

manually created.

D.  The command will need to be negated and performed after the VLAN is manually 

created.

 30.  You have been asked to segment the network for an R&D workgroup. The requirement 

is to allow the R&D group access to the existing servers, but no other VLANs should be 

able to access R&D. How can this be achieved with maximum flexibility?

A.  Create a new VLAN, configure a routed SVI interface, and apply ACLs to the VLAN.

B.  Create a new VLAN, configure a routed SVI interface, and apply extended ACLs to 

the R&D switch ports.

C.  Create a new VLAN, and install a new R&D server in the new VLAN.

D.  Create a new VLAN, and trunk the existing file server for both the production and 

R&D networks.

---

Chapter 2 

■

  Network Access (Domain 2)