Ccna certification Practice Tests

A.  The VLAN is still configured on a port.

B.  The VLAN serves as the switch’s main management IP.

C.  The VLAN is protected from deletion.

D.  The VLAN is still configured as a native VLAN on a trunk.

 25.  Why is it recommended that you do not use VLAN 1?

A.  It is not a production VLAN.

B.  It cannot be routed via an SVI.

C.  It cannot participate in VTP transfers.

D.  It shouldn’t be used for security reasons.

 26.  You attempt to configure a VLAN with a new name. You receive the error  

Default VLAN 1 may not have its name changed. What is wrong?

A.  The VLAN is used on interfaces currently.

B.  The VLAN is protected from any changes.

C.  The VLAN is being referenced by its name in interface configuration.

D.  You are not in the VLAN database when committing the change.

---

50

 

Chapter 2 

■

  Network Access (Domain 2)

 27.  You have configured a new VLAN 12 and applied it to the interface. However, you find 

that the computer still remains in VLAN 1. Which command will fix the issue? Refer to 

the following exhibit.

Switch#sh run

Building configuration...

[output cut]

!

interface FastEthernet0/4

  switchport access vlan 12

  switchport mode trunk

  switchport nonegotiate

  spanning-tree portfast

!

A. 

Switch(config-if)#switchport native vlan 12

B. 

Switch(config-if)#no switchport nonegotiate