2 laboratoriya ishi kommutatorda port xavfsizligi (port security) ni sozlash ishlatilmayotgan portlarni o`chirish

Port-security sozlanishlari haqidagi ma’lumotlarni ko`rish

switch# show port-security

switch# show port-security interface fa0/3

switch# show port-security address

Topshiriq

• 
  2.4-rasmda keltirilgan tarmoq topologiyasini Cisco Packet Tracer dasturida tuzish talab qilinadi;
  
• 
  Har bir kompyuter uchun IP manzilni sozlang va MAC manzillarni 2.2-rasmda ko`rsatilgandek aniqlang;
  
• 
  Kommutatorning har bir portlariga xavfsizlik ko`rsatkichlarini sozlang;
  
• 
  2.1-jadvalga yuqorida keltirilgan topshiriqlarni kiriting.
  

2.4-rasm. Tarmoq topologiyasi.

2.1-jadval

Qurilma	IP-manzil	МАС-manzil	Interfeys	Port rejimlari
Laptop0	192.168.1.1	00E0.F902.D683	Fa0	n/a
Laptop1	192.168.1.2	000B.BE9B.EE4A	Fa0	n/a
Laptop2	192.168.1.3	00D0.5819.04E3	Fa0	n/a
Laptop3	192.168.1.4	0004.9AB9.DAC2	Fa0	n/a
Laptop4	192.168.1.5	00D0.BAC2.8C58	Fa0	n/a
Laptop5	192.168.1.6	0000.0C6E.01E0	Fa0	n/a
SW1	N/A	N/A	Fa0/1	sticky
SW1	N/A	N/A	Fa0/2	mac-address 00D0.5819.04E3
SW1	N/A	N/A	Fa0/3	violation protect
SW1	N/A	N/A	Fa0/5-24	Shutdown
SW2	N/A	N/A	Fa0/1	restrict
SW2	N/A	N/A	Fa0/2	restrict
SW2	N/A	N/A	Fa0/3	Protect
SW2	N/A	N/A	Fa0/4	maximum 4

Ishni bajarish tartibi

Switch>enable

Switch#configure terminal

Switch(config)#hostname Sw1

Sw1(config)#interface fa0/1

1. Portni access rejimiga o`zgartirish

Sw1(config-if)#switchport mode access

2. Portda port-securityni ishga tushurish

Sw1 (config-if)#switchport port-security
3. Secure-MAC ni dinamik aniqlashni ko`rsatish

Sw1 (config-if)#switchport port-security mac-address sticky

Sw1 (config-if)#exit

4. Secure-MAC ni statik aniqlashni ko`rsatish

Sw1(config)#interface fastEthernet 0/2

Sw1(config-if)#switchport mode access

Sw1(config-if)#switchport port-security

Sw1(config-if)#switchport port-security mac-address 000B.BE9B.EE4A

Sw1(config-if)#end

5. Xavfsizlik buzilishigi javob berish rejimini sozlash

Sw1(config)#interface fastEthernet 0/3

Sw1(config-if)#switchport mode access

Sw1(config-if)#switchport port-security

Sw1(config-if)#switchport port-security mac-address sticky

Sw1(config-if)#switchport port-security violation protect

Sw1(config-if)#end

6. Ishlatilmayotgan portlarni o`chirish

Sw1(config)#interface range fastEthernet 0/5-24

Sw1(config-if-range)#shutdown

7. Portda secure-MAC maksimal soni N ni ko`rsatish (Bu buyruq Sw2 kommutatorga tavsiya etiladi)

Switch>enable

Switch#configure terminal

Switch(config)#hostname Sw2

Sw2(config)#interface fa0/4

Sw2(config-if)#switchport mode trunk

Sw2(config-if)#switchport port-security maximum 4

Sw1(config-if)#switchport port-security violation restrict

8. Natijani tekshirish

Switch#show port-security interface fa 0/1
Port Security : Enabled
Port Status : Secure-up
Violation Mode : Shutdown
Aging Time : 0 mins
Aging Type : Absolute
SecureStatic Address Aging : Disabled
Maximum MAC Addresses : 1
Total MAC Addresses : 0
Configured MAC Addresses : 0
Sticky MAC Addresses : 0
Last Source Address:Vlan : 0001.63B4.E4A6:1
Security Violation Count : 0

9. Sozlamalarni saqlash

Switch#copy running-config startup-config

1.