Corporate Headquarters

Verifying a Policy Map Configuration
Use the 
show policy-map
[
interface 
[
interface-spec 
[
input | output 
[
class
 class-name
]]]]
 
command to 
display the configuration of a policy map and its associated class maps. Forms of this command are listed 
in the following table:
Command
Purpose
Step 1
Router(config)# 
policy-map 
policy-name
User specified policy map name.
Step 2
Router(config-pmap)# 
class 
class-name
Specifies the name of a previously defined class map.
Step 3
Router(config-pmap-c)# 
bandwidth 
kbps
Specifies a minimum bandwidth guarantee to a traffic 
class.
Step 4
Router(config-pmap-c)#
 police 
bps
 
conform 
transmit exceed drop
Specifies a maximum bandwidth usage by a traffic class.
Step 5
Router(config-pmap-c)# 
set ip precedence {0-7}
Specifies the IP precedence of packets within a traffic 
class.
Step 6
outer(config-pmap-c)# 
set qos-group {0-99}
Specifies a QoS-group value to associate with the packet.
Step 7
Router(config-pmap-c)# 
random-detect
Enables weighted random early detection (WRED) drop 
policy for a traffic class which has a bandwidth guarantee.
Step 8
Router(config-pmap-c)# 
queue-limit 
packets
Specifies maximum number of packets queued for a 
traffic class (in the absence of random-detect).
Command
Purpose
Step 1
Router(config-if)#
service-policy output 
policy-map-name
Specifies the name of the policy map to be attached to the 
output direction of the interface.