Страница 1 мировой engineering стандарты общая спецификация

sendOneResponse
Request for one-shot response message(s) (one UUDT message for each requested
DPID).
M
02
scheduleAtSlowRate
Request to schedule DPID(s) in the request at slow periodic rate.
U
03
scheduleAtMediumRate
Request to schedule DPID(s) in the request at medium periodic rate.
U
04
scheduleAtFastRate
Request to schedule DPID(s) in the request at fast periodic rate.
U
05 thru
FF
ReservedByDocument
This value is reserved by this document for future definition.
M
Where:
C
2 
= Support of this sub-function parameter is mandatory if any of the periodic levels of this service are
supported.
The sub-function parameters supported by a Node are vehicle manufacturer optional and shall be documented
in the Component Technical Specification (CTS).
8.19.2.2 Request Message Data Parameter Definition. 
Tables 191 and 192 specifiy the data parameter
definitions and valid ranges for this service.
Table 191: Request Message Data Parameter Definition
Definition
request_DPIDs[]
This is an array of the DPID numbers that the tester is requesting. The data values identify to the node which
DPID(s) to transmit or stop transmitting (as indicated by the preceding sub-function parameter byte). The
number of elements in this array can vary based on the preceding sub-function parameter byte. A further
definition of the meaning of the DPID data contained in this array can be found below.
--``,,``````,``,,``,,,`,`,`,,-`-`,,`,,`,`,,`---
Page 215
GM WORLDWIDE ENGINEERING STANDARDS
GMW3110
Table 192: Definition and Valid Ranges Of DPID Parameters
Hex Description
Cvt Mnemonic
00
ReservedByDocument
This value is used to indicate that one or more of the scheduled DPIDs are
being stopped. No data is ever sent with this DPID number.
M