Docker Cookbook

1.4 Setting Up a Local Docker Host by Using Vagrant | 5

---

$ wget https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.4_x86_64.deb
$ sudo dpkg -i vagrant_1.7.4_x86_64.deb
$ sudo vagrant --version
Vagrant 1.7.4
1.5 Installing Docker on a Raspberry Pi
Problem
You use 
Raspberry Pi
a lot at your company or you are a hobbyist who enjoys hacking
with Raspberry Pi. In either case, you would like to know how to install Docker on
your device.
Solution
Use the preconfigured Secure Digital (SD) card image from 
Hypriot
. You need to fol‐
low these steps:
1.
Download the SD card image
.
2. Transfer it to your SD card.
3. Install the SD card on your Raspberry Pi and boot it.
4. Log in to your Raspberry Pi and use Docker.
Discussion
For example, on an OS X host, you can follow the 
instructions
 from Hypriot.
Download and unzip the SD image:
$ curl -sOL http://downloads.hypriot.com/hypriot-rpi-20150416-201537.img.zip
$ unzip hypriot-rpi-20150416-201537.img.zip
Now insert your SD card in your host card reader; list the available disks to find out
which one the SD card is. Unmount this disk and transfer the image onto it by using
dd
. Assuming the disk is 
disk1
:
$ diskutil list
...
$ diskutil unmountdisk /dev/disk1
$ sudo dd if=hypriot-rpi-20150416-201537.img of=/dev/rdisk1 bs=1m
$ diskutil unmountdisk /dev/disk1
Once the image has been transferred, you can 
eject
the disk cleanly, remove the SD
card from the card reader, and put it in your Raspberry Pi. You will need to find the
IP address of your Raspberry Pi, and then you can 
ssh
to it and use 
hypriot
as the
password like so: