Muhammad al-xorazmiy nomidagi toshkent axborot texnologiyalari universtiteti farg’ona filiali “axborot texnologiyalari” kafedrasi

if(value_patensiometr > 0){
delay_time-210-(( value_patensiometr/5)); // qaytariluvchi o’zingizning asosiy kodingizni qo’yin
}
else
{
delay_time=0;
}
Serial.println(value_patensiometr);
digitalWrite(0,HIGH); digitalWrite(yashil_pin_2,HIGH); digitalWrite(ko’k_pin_3,LOW); delay(delay_time);
digitalWrite(qizil_pin_1, LOW); digitalWrite(yashil_pin_2,HIGH); digitalWrite(ko’k_pin_3,HIGH); delay(delay_time);
digitalWrite(qizil_pin_1,LOW); digitalWrite(ko’k_pin_3,LOW); digitalWrite(ko’k_pin_3,HIGH); delay(delay_time);
digitalWrite(qizil_pin_1,HIGH); digitalWrite(yashil_pin_2,LOW); digitalWrite(ko’k_pin_3,LOW); delay(delay_time);
}
4)Programma kodini arduinoga yuklash uchun quyidagi rasmdagi

instrumentga sichqoncha ko’rsatkichini olib borib bosing.
Tizim kompilyatori dasturni tekshirib xatosiz bo’lsa kontrollerga yuklaydi va programma ishga
tushadi. Agar dastur kodida xatolik bo’lsa kompilyator bu xatolikni qizil rang bilan yoritib ko’rsatadi. Xatolikni tuzatib dasturni qayta yuklang.
Amaliy qism:

int qizil=1;
int yashil=2;
int kok=3;
void setup()
{
pinMode(qizil, OUTPUT);
pinMode(yashil, OUTPUT);
pinMode(kok, OUTPUT);
}

void loop()
{
digitalWrite(qizil, HIGH);
digitalWrite(yashil, LOW);
digitalWrite(kok, LOW);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(qizil, LOW);
digitalWrite(yashil, HIGH);
digitalWrite(kok, LOW);
delay(1000); // Wait for 1000 millisecond(s)
digitalWrite(qizil, LOW);
digitalWrite(yashil, LOW);