Modern scientific research: achievements, innovations and development prospects

part. 
Resistance of paint to wet 
evaporation 

---

68 
E09:2010, 
IDT) Ilk bor 
4
. 
O‘z DSt 
ISO 
18831:2019 
(ISO 
18831:2016, 
IDT) Ilk bor 
Clothes. 
Shape 
installation 
using 
digital 
technology. Quality marks of 
virtual clothing 
5
. 
O‘z DSt 
ISO 
8559-
3:2019 (ISO 
8559-3:2018, 
IDT) Ilk bor 
Clothing sizes. Part 3. 
Methodology 
for 
creating 
tables for measuring the 
parameters of the human body 
and their interval 
International standards are adopted in the form of state standards of the 
Republic of Uzbekistan, in the state language and in one of the original 
languages of the standard. Adoption of international standards in the Republic 
in the form of state standards of the Republic of Uzbekistan is carried out as 
follows: 
- IDT abbreviated, exactly similar to international standards; 
- MOD modified relative to the international standard, abbreviated; 
- NEQ is not equivalent to the abbreviated international standards. 
Technical committees on standardization of work on preparation for 
acceptance of the international standards as the state standards of the 
Republic of Uzbekistan, in their absence - the Uzbek institute of standards of 
the Uzbek agency of technical regulation (further - Institute is called) by 
contract. 
If the international standard adopted in the Republic of Uzbekistan 
contains references to standards that are not accepted as state standards, 
their adoption should be carried out simultaneously. When working on the 
simultaneous adoption of a reference international standard, the importance of 
the reference international standard, which is closely related to the adopted 
international standard and ensures that its requirements are met, should be 
taken into account. 
The state standard of the Republic of Uzbekistan is considered to be 
exactly similar to international standards in the following cases: 
- The state standard of the Republic of Uzbekistan is identical in terms of 
technical structure, structure and content; 
- The state standard of the Republic of Uzbekistan is similar in technical 
composition, but it can be amended. 

---

69 
The state standard of the Republic of Uzbekistan is considered modified 
to the international standard with the following conditions: 
- including identified and explained technical deviations; 
- reflects the structure of an international standard (international 
document) that has been identified and explained and that the structure of both 
standards can be modified only if a simple comparison is possible; 
- in the absence of state standards of the Republic of Uzbekistan in the 
form of normative references that can replace references to international 
standards - the content of the international standard (its sections, subsections, 
clauses, subsections, appendices) to be referenced instead of each reference 
) an alternative substitute rule is given; 
- the text of the applicable international standard contains references to 
other international standards adopted as identical or modified state standards 
- in the preparation of the draft amended standard uses references to the 
harmonized state standards instead of references to international standards. 
In the text of the modified standard, instead of a reference to an 
international standard, it is allowed to refer to a state standard that applies to 
the same standardization object (product, process or service) but is not in line 
with the reference international standards. 
When adopting a state standard of the Republic of Uzbekistan modified 
in accordance with an international standard, the identification number of the 
international standard shall not be included in the serial number. The number 
of the modified international standard is written on the title page. 
The state standard of the Republic of Uzbekistan is non-equivalent to the 
international standard under the following conditions: 
- containing unidentified and unexplained technical deviations; 
- unidentified and unexplained changes in the structure that do not provide 
a simple comparison with international standards; 
- contains a small part of the requirements of the international standard 
(in terms of quantity and / or significance). 
When adopting a state standard of the Republic of Uzbekistan that is not 
equivalent to an international standard, the identification number of the 
international standard shall not be included in the serial number. The number 
of the non-equivalent international standard is written on the title page. 
Adoption of regional standards in the Republic is carried out by direct 
acceptance of the standard identification number in the state language and in 
one of the original languages of the standard. 
The standards adopted by the Interstate Council on Standardization, 
Metrology and Certification of the Commonwealth of Independent States shall 
be adopted in accordance with the rules of the Interstate Council on 
Standardization. 

---

70 
If the accepted regional or interstate standards contain references to other 
international, regional or interstate standards not accepted in the republic, their 
simultaneous adoption should be taken. 
When working on the simultaneous adoption of international, regional or 
interstate standards, first of all take into account the importance of adopting 
reference standards that are closely related to the adopted regional or 
interstate standard and ensure that their requirements are met. need to get. 
Adoption of standards of foreign countries. Adoption of foreign standards 
in the Republic is carried out by direct application in the state language and in 
one of the original languages of the standard, while maintaining the 
identification number of the standard in accordance with the agreements and / 
or agreements concluded with these countries. 
The consent to the application of the standards of these countries 
obtained from the competent authorities of foreign countries is the basis for the 
adoption of foreign standards in the Republic. If the adopted foreign standard 
contains references to other Standards not adopted in the Republic, work 
should be done on their simultaneous adoption. In the process of simultaneous 
adoption of the Referred Standards, it is important to take into account, first of 
all, the importance of adopting the Referred Standards, which are closely 
related to the standards of the host country and ensure that their requirements 
are met. 
No later than five days after receipt of the application to the Uzbek Agency 
for Technical Regulation on the adoption of standards, the Uzbek Agency for 
Technical Regulation shall approve the application of these standards to the 
competent authorities that have adopted them. sends a request to retrieve. 
Reconciliation of the adopted Standards with the stakeholders is carried 
out by the technical committees on standardization, in their absence - by the 
Institute. The adopted Standard will be considered by the interested parties 
within a period not exceeding fifteen days and proposals will be made on the 
expediency (inexpediency) of adoption of this standard in the country. 
The Uzbekistan Agency for Technical Regulation shall make a decision 
on the appropriateness or inexpediency of applying the standards in the 
territory of the Republic of Uzbekistan within a period not exceeding five days.
The Standards adopted in the territory of the Republic of Uzbekistan are 
included in the State Fund of regulatory documents in the field of technical 
regulation. The Uzbek Agency for Technical Regulation maintains a register of 
adopted standards. Information on the Standards adopted in the territory of the 
Republic of Uzbekistan will be published on the official websites of the Uzbek 
Agency for Technical Regulation and the Institute no later than 5 days after the 
decision to apply. 

---

71 
International, interstate, regional standards and standards of foreign 
countries are applied in the territory of the Republic of Uzbekistan by state and 
economic management bodies, business entities and other stakeholders in 
accordance with their scope.