M b ganixanova Student: Variant-1

Toshkent Davlat Texnika Universiteti “Chet tillar “ Kafedrasi

Tasdiqlayman “Chet tillar kaf. mud. Final Assessment-1course

Date:_________ Group:_______

M.B Ganixanova_________________ Student:_____________________

Variant-1

1. Choose the correct answer. Write a, b, c or d in each space.

1 Be careful with that machine. __________ no guard on the blade.

a) It’s b) There’s c) Is d) Ther

2 You must __________ anywhere in the workshop or offices.

a) no smoke b) no smoking c) not smoke d) not smoking

3 What time __________ the two aeroplanes crash into each other?

a) did b) was c) have d) were

4 When I inspected the factory yesterday, there __________ no fire extinguishers.

a) are b) was c) is d) were

5 Where_________ at 2 pm yesterday afternoon?

a) are you b) you are c) were you d) you were

6 The road is dangerous here. The cars _____ drive off the road into the river.

a) must b) might c) won’t d) don’t

7 Look at that robot. Can it __________ and turn round?

a) reverses b) reversing c) reversed d) reverse

8 I’m pulling the rope very hard. Why __________ it breaking?

a) isn’t b) doesn’t c) hasn’t d) won’t

9 That oil __________ come from under the sea. It comes from the desert.

a) isn’t b) doesn’t c) haven’t d) wasn’t

10 The tunnel is 3.5 kilometres __________.

a) length b) of length c) long d) is long
2.Read the text, translate and retell.  Screwdriver 

A screwdriver is a tool, manual or powered, for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw—or ridged or treated for additional 'grip'. Handles are typically wood, metal, or plastic^[1] and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand.