Краткое содержание отчета по экологической оценке Проекта по уст ойчивом у управлению т верды м и от ходами

Sanitarian-Protection Zone
295. 
The location of all service centers was selected in accordance with several conditions: 
environmental, resettlement and technological. National legislation16 identifies activities on 
repairing of special techniques (trucks, bulldozer and etc.) as belonged to 3rd class of hazard 
(1 is highest and 5 is lowest). In case of implementation of advanced technologies 
(conduction maintenance works inside of the building with modern techniques) service 
centers are classified as class 4. For this class buffer zone is 100 meters. However, if 
maintenance works implemented in service center does not include tin-painting works, the 
buffer zone can be decreased up to twice - 50 m.
296. 
The extent of the buffer zone was discussed with the Republican Center of State 
Sanitarian Epidemiological Surveillance under the Ministry of Health. As per an official letter 
submitted to the Implementation Agency - State Committee on Ecology and Environment 
Protection #09-/5336 dated from August 21, 2019 (Attachment 1), service centers designed 
for the provision of the maintenance for trucks without welding and painting works, the buffer 
zone is defined as 50 meters. Therefore, all sites were selected with the condition to keep 50 
meters between the workshop area and the closest living houses. Moreover, during site 
selection, attention was paid to the presence of such sensitive receptors as schools, hospitals 
and historical places.
297. 
If during the detailed design stage, or implementation stage, the locations of service
16 Sanitarian Norms and Rules (SanR&N) 0350-17 “Protection of air in settlement area in Uzbekistan”, 2017
88

---

centers will change, the buffer zone requirements have to be reassessed. The following 
activities are proposing to mitigate impacts identified at the pre-construction stage.