Salt water treatment 1.Lower and open hose in
⑤
; completely drain the device. Then raise the end
of the hose higher than the top of the sotener.
2.Dissolve 2.5 kg (5.5 lb) of salt in 7 L (1.85 gal) of water. Remove any impuri-
ies from the salt water.
3.Open
④
and pour the salt water into it. Let sit for over 1 hour.
4.Lower the hose in
⑤
and drain the machine.
5.Run clean water through the sotener for 10 minutes to wash out the salt
water.
6.Take 0.5 L (1.1 lb) of sotened water and do a test with JWA. Shake; it should
produce lots of foam and keep clear. You can do this salt water treatment
about 15 imes (the number will vary greatly according to water quality).
*Salt water treatment prolongs resin life.