History Of Electronics

Wireless telegraphy and radio

Some of the devices which would enable wireless telegraphy were invented before 1900. These include the spark-gap transmitter and the coherer with early demonstrations and published findings by David Edward Hughes (1880)^[9] and Heinrich Rudolf Hertz (1887 to 1890)^[10] and further additions to the field by Édouard Branly, Nikola Tesla, Oliver Lodge, Jagadish Chandra Bose, and Ferdinand Braun. In 1896, Guglielmo Marconi went on to develop the first practical and widely used radio wave based communication system.^[11][12]

Millimetre wave communication was first investigated by Jagadish Chandra Bose during 1894–1896, when he reached an extremely high frequency of up to 60 GHz in his experiments.^[13] He also introduced the use of semiconductor junctions to detect radio waves,^[14] when he patented the radio crystal detector in 1901.

In 1904, John Ambrose Fleming, the first professor of electrical Engineering at University College London, invented the first radio tube, the diode. Then, in 1906, Robert von Lieben and Lee De Forest independently developed the amplifier tube, called the triode. Electronics is often considered to have begun with the invention of the triode. Within 10 years, the device was used in radio transmitters and receivers as well as systems for long distance telephone calls.

The invention of the triode amplifier, generator, and detector made audio communication by radio practical. (Reginald Fessenden's 1906 transmissions used an electro-mechanical alternator.) In 1912, Edwin H. Armstrong invented the regenerative feedback amplifier and oscillator; he also invented the superheterodyne radio receiver and could be considered the father of modern radio.^[17]

The first known radio news program was broadcast 31 August 1920 by station 8MK, the unlicensed predecessor of WWJ (AM) in Detroit, Michigan. Regular wireless broadcasts for entertainment commenced in 1922 from the Marconi Research Centre at Writtle near Chelmsford, England. The station was known as 2MT and was followed by 2LO, broadcasting from Strand, London.

While some early radios used some type of amplification through electric current or battery, through the mid-1920s the most common type of receiver was the crystal set. In the 1920s, amplifying vacuum tubes revolutionized both radio receivers and transmitters.

Vacuum tubes remained the preferred amplifying device for 40 years, until researchers working for William Shockley at Bell Labs invented the transistor in 1947. In the following years, transistors made small portable radios, or transistor radios, possible as well as allowing more powerful mainframe computers to be built. Transistors were smaller and required lower voltages than vacuum tubes to work.

Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by hand. These non-integrated circuits consumed much space and power, were prone to failure and were limited in speed although they are still common in simple applications. By contrast, integrated circuits packed a large number — often millions — of tiny electrical components, mainly transistors, into a small chip around the size of a coin.^[18]