Corporate Headquarters

Verifying Static Inside Source Address Translation
To verify the configuration:
•
Enter the 
show ip nat translations verbose
EXEC command to see the global and local address 
translations and to confirm static translation is configured.
hq-sanjose# 
show ip nat translations verbose
Pro Inside global Inside local Outside local Outside
global
--- 10.2.2.2 10.1.6.5 --- ---
create 00:10:28, use 00:10:28, flags:
static
•
Enter the 
show running-config
EXEC command to see the inside and outside interfaces, global and 
local address translations, and to confirm static translation is configured (display text has been 
omitted from the following sample output for clarity).
hq-sanjose# 
show running-config
interface FastEthernet0/1
ip address 10.1.6.5 255.255.255.0
no ip directed-broadcast
ip nat inside
interface serial2/0
ip address 172.16.2.2 255.255.255.0
ip nat outside
ip nat inside source static 10.1.6.5 10.2.2.2
Command
Purpose
Step 1
hq-sanjose(config)#
ip nat inside source static 
10.1.6.5 10.2.2.2
Establish static translation between an inside local 
address and an inside global address. This example 
translates inside local address 10.1.6.5 (the server) to 
inside global address 10.2.2.2.
Step 2
hq-sanjose(config)# 
interface fastethernet 0/1
Specify the inside interface. This example specifies Fast 
Ethernet interface 0/1 on the headquarters router.
Step 3
hq-sanjose(config-if)# 
ip nat inside
Mark the interface as connected to the inside.
Step 4
hq-sanjose(config-if)# 
interface serial 2/0
Specify the outside interface. This example specifies 
serial interface 2/0 on the headquarters router.