Ccna routing and Switching Complete Study Guide

C.  The ARP entry has timed out.

D.  IPv6 can reach the neighbor address but the addresses has not yet been resolved.

13.  Serial0/1 goes down. How will EIGRP send packets to the 10.1.1.0 network?

Corp#

show ip eigrp topology

[output cut]

P 10.1.1.0/24, 2 successors, FD is 2681842

         via 10.1.2.2 (2681842/2169856), Serial0/0

         via 10.1.3.1 (2973467/2579243), Serial0/2

         via 10.1.3.3 (2681842/2169856), Serial0/1

A.  EIGRP will put the 10.1.1.0 network into active mode.

B.  EIGRP will drop all packets destined for 10.1.1.0.

C.  EIGRP will just keep sending packets out s0/0.

D.  EIGRP will use s0/2 as the successor and keep routing to 10.1.1.0.

14.  What command produced the following output?

via FE80::201:C9FF:FED0:3301 (29110112/33316), Serial0/0/0

via FE80::209:7CFF:FE51:B401 (4470112/42216), Serial0/0/1

via FE80::209:7CFF:FE51:B401 (2170112/2816), Serial0/0/2