Ccna routing and Switching Complete Study Guide

S   2001:DB8:3C4D:3::/64 [1/0]

    

 via 2001:DB8:3C4D:2:21B:D4FF:FE0A:539

L   FF00::/8 [0/0]

     via Null0, receive

Now we’re talking—that tells us a lot more than R1’s table did! We have both of our 

directly connected configured LANs, Fa0/0 and Fa0/1, right there in the routing table, as 

well as a static route to 2001:DB8:3C4D:3::/64, which is the remote LAN Fa0/0 off of R1, 

which is good. Now let’s fix the route problem on R1 by adding a route that gives us access 

to the Server1 network.

R1(config)#

ipv6 route ::/0 fastethernet 0/1 FE80::21A:6DFF:FE64:9B3

---

858

 

Chapter 20 

■

  Troubleshooting IP, IPv6, and VLANs

I want to point out that I didn’t need to make the default route as difficult as I did. I 

entered both the exit interface and next-hop link-local address when just the exit interface 

or next-hop global addresses would be mandatory, but not the link-local. So it could have 

simply just been this:

R1(config)#