Ccna certification Practice Tests

A.  The interface is shut down.

B.  The interface is negotiated at half-duplex.

C.  The interface is operating normally.

D.  The cable is disconnected for the node.

 85.  A router is connected to the switch via a Fast Ethernet interface. Intermittently you 

experience an outage. What should be done first to remedy the problem? Refer to the 

following exhibit.

!

interface FastEthernet0/2

  switchport mode access

  switchport access vlan 5

  switchport nonegotiate

[output cut]

A.  The speed and duplex should be set statically.

B.  Change the VLAN to a less crowded VLAN.

C.  Change the switchport mode to a trunk.

D.  Set the switchport to auto-negotiate.

 86.  In the following exhibit, what can you conclude about the interface or node?

Switch#sh int fastEthernet 0/2

FastEthernet0/2 is up, line protocol is up (connected)

  Hardware is Lance, address is 000a.f36c.1502 (bia 000a.f36c.1502)

BW 10000 Kbit, DLY 1000 usec,

   reliability 255/255, txload 220/255, rxload 80/255

  Encapsulation ARPA, loopback not set

  Keepalive set (10 sec)

  Full-duplex, 10Mb/s

[output cut]

   956 packets input, 193351 bytes, 0 no buffer

   Received 956 broadcasts, 0 runts, 0 giants, 0 throttles

   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

   0 watchdog, 0 multicast, 0 pause input

   0 input packets with dribble condition detected

   2357 packets output, 263570 bytes, 0 underruns

   0 output errors, 0 collisions, 10 interface resets

   0 babbles, 0 late collision, 0 deferred

   0 lost carrier, 0 no carrier

   0 output buffer failures, 0 output buffers swapped out

---

Chapter 1 

■

  Network Fundamentals (Domain 1)