Ccna certification Practice Tests

A.  The device has source route bridge capability.

B.  The device has switch capability.

C.  The device has router capability.

D.  The device has switch and router capability.

---

Chapter 8 

■

  Practice Exam 2 

241

 28.  Your network is connected in a star topology. You are assessing a network upgrade. 

Which command will help you determine the version of IOS on the switches and routers in 

your network with the least amount of effort?

A. 

Switch#show version

B. 

Switch#show running-config

C. 

Switch#show cdp neighbors detail

D. 

Switch#show lldp neighbors

 29.  You have just configured the adjacent side of an EtherChannel from the console and 

receive the message in the following exhibit. What is the problem?

%PM-4-ERR_DISABLE: channel-misconfig error detected on Gig0/1, putting Gig0/1 in err-disable state

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel 1, changed state to down

%PM-4-ERR_DISABLE: channel-misconfig error detected on Gig0/2, putting Gig0/2 in err-disable state

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Tnterface GigabitEthernet0/2, changed state to down

A.  One of the switches is configured with on mode and the other with desirable mode.

B.  One of the switches is configured with auto mode and the other with desirable mode.

C.  One of the switches is configured with active mode and the other with active mode.

D.  One of the switches is configured with passive mode and the other with passive mode.

 30.  You have configured the command 

channel-group 1 mode active on a range of 

interfaces that will participate in an EtherChannel. Which pseudo interface is created for 

overall management of the EtherChannel?