Ccna certification Practice Tests

A.  RIP routing

B.  OSPF routing

C.  EIGRP routing

D.  Static routing

---

Chapter 3 

■

  IP Connectivity (Domain 3) 

115

 147.  Which type of routing technique allows for route summarization to be computed 

automatically by routers?

A.  Dynamic routing

B.  Directly connected routes

C.  Default routing

D.  Static routing

 148.  Which routing technique requires administrator intervention when a route goes down?

A.  Dynamic routing

B.  Directly connected routes

C.  Default routing

D.  Static routing

 149.  You have several routes configured on a router. Which command will show only the  

static routes?

A. 

Router#show static routes

B. 

Router#show ip static routes

C. 

Router#show ip routes static

D. 

Router#show ip routes

 150.  On interface Serial 0/1, you type 

ipv6 address 2000:db8:4400:2300::1234/64. Which 

statement is true?

A.  The router will calculate a network ID of 2000:0db8::.

B.  The IPv6 address of 2000:0db8:4400:2300:1234:0000:0000:0000/128 will be 

assigned to Serial 0/0.

C.  The router will calculate a network ID of 2000:0db8:4400:2300::/64 for Serial 0/0.

D.  The router will calculate a network ID of 2000:db8:4400:2300:0000/64 for Serial 0/0.

 151.  When you check the IPv6 addresses configured on the interfaces, you find two IPv6 

addresses: One address is a 2001:db8::/64 address, and the other is an ff80::/64 address. 

However, you do not see a route statement for the ff80::/64 address in the routing table. 

Why?

A.  Multicast addresses do not get added to the routing tables.

B.  Link-local addresses do not get added to the routing tables.

C.  Only one route statement can be in the routing table at a time for an interface.

D.  Broadcast addresses do not get added to the routing tables.

---

116

 

Chapter 3 

■

  IP Connectivity (Domain 3)

 152.  In the following exhibit, RIP is running on all of the routers. On Router A, you want to 

make sure that if Router B fails, a backup route is used through Router C to Network B. 

Which statement will achieve this?

Fa0/1

192.168.1.1/24

S0/0

192.168.2.1/30

S0/1

192.168.2.9/30

Fa0/1

192.168.3.1/24

Fa0/1

192.168.3.2/24

S0/0

192.168.2.2/30

S0/0

192.168.2.10/30

S0/0

192.168.2.6/30

S0/1

192.168.2.5/30