Ccna certification Practice Tests

D. 

Switch(config-vlan)#enable pruning

 56.  When enabling VTP pruning, where does it need to be configured?

A.  VTP pruning needs to be configured only on the VTP server.

B.  VTP pruning needs to be configured only on the VTP client.

C.  VTP pruning needs to be configured only on the VTP transparent.

D.  VTP pruning needs to be configured on all VTP clients and the server.

---

58

 

Chapter 2 

■

  Network Access (Domain 2)

 57.  You configure a new VLAN of 22 on Switch A. You have configured a few access links 

with the new VLAN and they work as normal. They do not forward traffic to ports 

configured in the same VLAN on Switch B. All other VLANs function fine between the 

switches. What is the problem? Refer to the following exhibit.

Current configuration : 202 bytes

!

interface FastEthernet0/32

 description Switch A to Switch B

 switchport trunk encapsulation dot1q

 switchport trunk native vlan 2

 switchport trunk allowed vlan 4,6,12,15

 switchport mode trunk

end