Birmingham mumbai

      addresses: [192.168.100.50/24]
      gateway4: 192.168.100.1
      nameservers:
        addresses: [192.168.100.1, 192.168.100.2]
  version: 2
In the example, I've bolded four lines, which were added in place of the 
dhcp4: true
 
line. First, we set the actual IP address:
      addresses: [192.168.100.50/24]
There, I've used an example IP address of 
192.168.100.50/24
. On your end, you 
would make sure that the IP address you choose is within the scope of the network 
you'd like your server to be a part of. As I mentioned earlier, the IP address you 
choose should 
not
 be within the DHCP scope that automatically assigned IP 
addresses are chosen from. The preceding IP address would be fine if the example 
scope of the DHCP server on your network ranged from 
192.168.100.100
 to 
192.168.100.150
. The IP chosen here of 
192.168.100.50
 is outside of that, so we 
don't have to worry about another device being assigned that address. 

---

Connecting to Networks