Basic Configuration Commands Table of Contents

2.1.6 disconnect

The following command is used to clear the currently mounted outward telnet session:
disconnect no

Parameter

Parameter	Description
No	Number of the currently mounted telnet session that is checked through the where command

Default

None

Command mode

Global configuration

Instruction

The command can be used to clear the currently mounted outward telnet connection at the client side.
Note:
The disconnect command is different from the clear telnet command. The former is used at the client side and clears the outward telnet connection. The latter is used at the server and clears the inward telnet connection.

Example

switchA>telnet 192.168.20.1
Welcome to Multi-Protocol 2000 Series switch
switchB>ena
switchB#(press ctrl-shift-6+x)
switchA> telnet 192.168.20.2
Welcome to Multi-Protocol 2000 Series switch
switchC>ena
switchC#(press ctrl-shift-6+x)
switchA>where
NO. Remote Addr Remote Port Local Addr Local Port
1 192.168.20.1 23 192.168.20.180 20034
2 192.168.20.2 23 192.168.20.180 20035
switchA>disconnect 1
y
Connection closed by remote host.
switchA>
After you enter where at switch A and the mounted outward connection of switch A is displayed, enter disconnect 1. You will be prompted whether the connection of switch B is closed. After you enter Y, the connection is closed.

2.1.7 clear telnet

The following is a command format to clear the telnet session at the server:
clear telnet no