Ams trex™ Device Communicator

Note
The Trex unit does NOT have security enabled out of the box.
2.15.1
Enable local security for a Trex unit
Procedure
1. Connect the Trex unit to the PC where Upgrade Studio is installed.
2. In Upgrade Studio, select 
More
→
AMS Trex Security
.
3. Click the Trex unit that is displayed on the left side of the screen.
4. Select 
Local
.
5. Click 
Change Security Type
.
6. Click 
Yes
.
The Trex unit will restart.
7. Click 
OK
.
8. On the Trex unit, create a local administrator by entering a user name and password
and confirming the password.
9. Tap 
OK
.
Note
The local administrator can add or delete other users on the Trex unit.
2.15.2
Enable enterprise security for a Trex unit
Procedure
1. Connect the Trex unit to the PC where Upgrade Studio is installed.
2. In Upgrade Studio, select 
More
→
AMS Trex Security
.
3. Click the Trex unit that is displayed on the left side of the screen.
4. Select 
Enterprise
.
5. Click 
Change Security Type
.
6. Click 
Yes
.
The Trex unit will restart.
7. Click 
OK
.
8. On the Trex unit, enter the following information:
User Guide 
AMS Trex Device Communicator overview
September 2021
User Guide 
47

---

•
Domain - the Windows domain.
•
Network SSID - the wireless network SSID. The wireless network must have
WPA2-Enterprise security enabled.
•
User name - the domain user name.
•
Password - the password for the domain user name.
9. Tap 
OK
.
2.15.3
Disable security for a Trex unit