Ў збекистон республикаси олий ва ўрта махсус таълим вазирлиги ўзбекистон давлат жаҳон тиллари университети инглиз тили 1-факультети

APPENDIX 2

Please carefully read all the following information, it contains important instructions for the safety, the use and the maintenance of the appliance. Take good care of the operating instructions and pass them onto any future owner. Although this appliance was manufactured according to the recognised technical rules, it, like all other electrical appliances, becomes mortally dangerous when dropped into water. This danger exists even if the appliance is switched off.

A fault current circuit breaker for personal protection (30 mA) reduces the danger from electrical appliances that are accidentally dropped into water. Please ask your electrician. Repairs on electrical appliances must be made by trained fitters only. Improper repairs can lead to considerable hazards for the user. The manufacturer

shall not be liable for any damage which is caused by improper use or incorrect operation. The user of the appliance is urgently requested to observe the following instructions.

Take care!

Do not use this appliance in the bathtub, shower or over a wash hand basin filled with water Do not place a faulty appliance into operation. To assure safe operation of the appliance, connect it and operate it as directed on the nameplate. Always switch the appliance off when it is laid on its side when interrupting the drying procedure. When overheated for instance by covering the air slots – the appliance switches off automatically and

switches back on again after cooling off for a few minutes. After use, pull out the mains plug. In case of a fault, separate the appliance from the mains (pull out the mains plug). Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains. Do not pull the connection cord over sharp edges or use it for carrying. Do not pull the connection cord over heated hotplates or open flames. Have repairs and adjustments on the appliance performed by a trained engineer from our customer services department.